Back to home

Xenio 200 Instruction Guide

Setup and instructions for the Xenio 200 time clock device

Table of Contents

What's in the box
Installation
Time Clock Initial Setup
Web App Configuration
- Assigning Administrators & Employees
- Time Clock Settings
Enrollment
- Fingerprint Enrollment
- Proximity Card Enrollment
- Pin # Enrollment
Clocking In/Out
Troubleshooting & Assistance

	Xenio 200		QR Code

Power Adapter

Mounting Plate

Screw

Wall Anchors

Wall Mount Screw

Cover Plate

1. Using a pencil, mark 4 screw holes on the wall.

2. Insert Wall Anchors (B) into the 4 holes that you marked in Step 1.

3. Align your Wall Mount with the 4 Wall Anchors (B) and secure the mount to the wall with the 4 Screws (A) provided.

4. *When connecting to your network via ethernet: Run the cables (ethernet cable not provided) inside or outside of the wall.

5. Connect your ethernet cable to an ethernet wall jack, router, or switch. Insert the Power Adapter into an electrical receptacle.

6. Attach the other end of the ethernet cable and the Power Adapter to the Xenio.

When connecting power to the Xenio via POE (Power Over Ethernet), DO NOT connect the provided power adapter.

An ethernet cable is not required when using Wi-Fi.

7. Attach the Xenio to the Wall Mount.

8. Insert the Cover Plate (optional) into the grooves.

9. Secure the Xenio to the Wall Mount by fastening the Wall Mount Screw (C).

First, the Time Clock Device must be added to the software.

Once the Xenio 200 time clock is powered on, you will be prompted to begin the Initial Setup.

Learn how to assign Administrators and Employees to the time clock.
- How to Set the Time Clock Clocking Permissions
Learn how to adjust the brightness, audio, and more.
- Time Clock Settings Overview

Select an enrollment method for instructions:

Select a clocking method for instructions:

Having connection issues? Try the Time Clock Connection Helper

Contact Support: (888) 783-1493

To help us help you, please provide the Serial # of your Xenio 200 time clock.