Xenio F1000

Accessories

• 1 wall mounting bracket

• 1 mounting plate

• 4 wall plugs

• 4 self-tapping screws

• 4 M5 screws

• 2 M3 screws

Installation

1. Drill holes on the wall or another surface according to the mounting plate.

2. Use four supplied self-tapping screws to secure the mounting plate on the wall.

3. Route the cables through the mounting plate and bracket's cable hole and connect them to the wiring terminals.

4. Plug the wiring terminals into the device and use four supplied M5 screws to secure the bracket on the device.

5. Align the device with the mounting plate, buckle them together, and secure the device on the mounting plate with two supplied M3 screws.

6. Adjust the tilt angle of the device according to your actual needs.

7. Plug the green wiring terminals into the device.

8. Connect the power adapter and network cable (if applicable).

Please follow these steps if applicable:

Configure Time Clock Settings

Add the time clock to the software

Facial Recognition Enrollment (Xenio Devices)

Enroll, Edit, and Delete Employees' Time Clock Access Credentials (Fingerprints, Proximity Cards, & PINs)

Facial Recognition Enrollment (Xenio Devices)

Employee Clock In and Out on a Time Clock

Connect Your Time Clock Device to the Internet