To help you set up your new or replacement WorkEasy time clock, just follow these easy steps for the X200, WE50, WE200, X500, X700, M2000, and F1000 models. The screen layouts might look a bit different depending on the model, but the steps are pretty much the same.
Tap Get Started to begin.
Select your language and tap Next.
Select Wi-Fi or Ethernet as the connection type and tap Next.
Setting Up Wi-Fi
Select your Wi-Fi network from the list, enter the password, and tap Connect.
- If you are unsure of which network to select, contact your local IT or internet service provider.
- If the status displays Connecting for an extended period of time, please re-enter the password.When the status displays Connected, tap Cancel to return to the connection type screen.
You should now see You are online! at the top of the screen. Tap Next.
Tap Cloud.
The Configuring your device... screen appears with the message We're almost there!
— If the clock has already been added to your WorkEasy portal, setup continues automatically.
— If the clock has not been added, it stays on this screen until it is. See Time Clock Initial Setup.
Tap OK.
Tap Next.
Tap Done.
Setting Up Ethernet
Plug an Ethernet cable into the device (next to the power adapter) and .
Wait for the device to display an IP address.
If it shows 0.0.0.0, go to the Connection Type screen, select Wi-Fi, and turn Wi-Fi off.
To set a Static IP, scroll down to the bottom and tap Advanced Options.
Ensure IP Mode is set to Static.
Tap the IP Address field, enter an IP, and tap Save.
Once a valid IP Address is displayed, tap Cancel to return to the connection type screen.
You should now see You are online! at the top. Tap Next.
Tap Cloud.
Tap OK. If port 8883 does not work, try 443, depending on your company's network policy.
Tap Next.
Tap Done to reach the Home screen.
If you have questions, please call us at (888)783-1493, email support@workeasysoftware.com, or submit a ticket.