---
title: "Xenio 200 Installation Guide"
slug: "xenio-200"
tags: ["Ethernet Connection", "Wall Mount", "Xenio Installation"]
updated: 2026-10-04T15:53:20Z
published: 2026-10-04T15:53:20Z
canonical: "help.workeasysoftware.com/xenio-200"
---

> ## Documentation Index
> Fetch the complete documentation index at: https://help.workeasysoftware.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Xenio 200 Installation Guide

### Accessories

- 1 wall mounting bracket
- 1 mounting plate
- 4 wall anchors
- 4 screws
- 1 wall mount screw

### Installation

1. Using a pencil, mark four screw holes on the wall.
2. Insert wall anchors into the four holes you marked.
3. Align your wall mount with the four wall anchors and secure the mount to the wall with the four screws provided.
4. When connecting to your network via Ethernet, run the cables (Ethernet cable not provided) inside or outside the wall. ![](https://f.hubspotusercontent40.net/hubfs/7523197/image-png-Sep-29-2021-07-21-54-01-PM.png)
5. Connect your Ethernet cable to an Ethernet wall jack, router, or switch. Insert the Power Adapter into an electrical receptacle.
6. Attach the other end of the Ethernet cable and the power adapter to the Xenio. ![](https://f.hubspotusercontent40.net/hubfs/7523197/image-png-Sep-29-2021-07-32-32-46-PM.png)
7. Attach the Xenio to the wall mount. ![](https://f.hubspotusercontent40.net/hubfs/7523197/image-png-Oct-05-2021-03-27-23-00-PM.png)
8. Insert the Cover Plate (Optional) into the grooves. ![](https://f.hubspotusercontent40.net/hubfs/7523197/image-png-Sep-29-2021-07-51-14-69-PM.png)
9. Secure the Xenio to the wall mount by fastening the wall mount screw. ![](https://f.hubspotusercontent40.net/hubfs/7523197/image-png-Oct-07-2021-05-28-32-02-PM.png)

> [!CAUTION]
> Do not connect the provided power adapter when connecting power to the Xenio via POE (Power Over Ethernet).

## Next steps

After installing the device, follow these steps as applicable:

1. [Connect Your Time Clock Device to the Internet](https://help.workeasysoftware.com/docs/connecting-your-time-clock-device-to-the-internet)
2. [Add the time clock to the software](https://help.workeasysoftware.com/docs/time-clock-initial-setup)
3. [Configure Time Clock Settings](https://help.workeasysoftware.com/docs/configure-time-clock-settings)
4. [Facial Recognition Enrollment (Xenio Devices)](https://help.workeasysoftware.com/docs/facial-recognition-enrollment-xenio-devices)
5. [Employee Clock In and Out on a Time Clock](https://help.workeasysoftware.com/docs/clock-in-and-out-on-a-time-clock)